Filter
Top Products
Configuring the CS 1000E CP PM Call Server Page 153 of 466
Communication Server 1000E Installation and Commissioning
Configuring login IDs and passwords
Note: You must be logged in as a user with admin2 level privileges in
order to change the default username and password.
For increased security:
• Change the default login username and password.
The default login is username admin1 and password 0000, as used
throughout this guide.
• Configure the Limited Access Password (LAPW) IDs and passwords.
Follow Procedure 30 to configure login IDs and passwords.
Procedure 30
Configuring login IDs and passwords
1 Enter the command:
LD 17
CFN000
MEM AVAIL: (U/P): 1015918 USED U P: 138773 24956
TOT:1179647
DISK RECS AVAIL: 486
TMDI D-CHANNELS AVAIL: 0 USED: 0 TOT: 0
DCH AVAIL: 80 USED: 0 TOT: 80
AML AVAIL: 15 USED: 1 TOT: 16
2 Enter the command:
REQ CHG
3 Enter the command:
PSWD_COMP
<enter to accept default or set to required setting>
FPC
<enter to accept default or set to required setting>
LOUT
<enter to accept default or set to required setting>
FLTH
<enter to accept default or set to required setting>