Filter
Top Products
Installing and configuring Nortel IP Phones Page 417 of 466
Communication Server 1000E Installation and Commissioning
The temporary password is set.
Figure 175
Node Temp Password
Note 1: The entered password appears as asterisks. The valid
characters are 0-9 * #. The password can be 6 to 14 digits in length.
Note 2: The temporary password automatically deletes itself after it has
been used the defined number of times or when the duration expires,
whichever comes first.
15 Select NodePwd from the Group drop-down list.
16 Select the nodePwdShow command from the Command drop-down list.
17 Click RUN.
The updated temporary Nortel IP Phone Installer Password is displayed.
End of Procedure
Installing Nortel IP Phone hardware components
Follow Procedure 97 to install Nortel IP Phone hardware components.
Procedure 97
Installing Nortel IP Phone hardware components
For details on installing hardware components, see IP Phones: Description,
Installation, and Operation (NN43001-368).
1 Refer to Figure 176 on page 418, when installing the following:
a. Footstand
b. 3-Port Switch only on the Nortel IP Phone 2004, required if a single
Ethernet connection is shared with a PC
c. Ethernet cable from the set to the 3-Port Switch
d. Power Transformer or Power Splitter for Power over LAN unit
e. Handset