Nortel Networks 1000E Telephone User Manual


 
Page 222 of 466 Installing a Signaling Server
NN43041-310 Standard 01.11 October 2008
Figure 97
Standalone Signaling Server - NRS
Figure 98
NRS type — co-resident Signaling Server
9 Select the type of NRS to be provided by this Signaling Server. See
Figure 98 for a co-resident Signaling Server. See Figure 97 for a
stand-alone Signaling Server.
If this Signaling Server is to be the Primary NRS, enter a.
If this Signaling Server is to be the Alternate NRS, enter b.
If this Signaling Server is not a stand-alone Signaling Server and is
to be the Fail-safe NRS, enter c.
Refer to IP Peer Networking: Installation and Commissioning
(NN43001-313)
for more information on the NRS.
CS 1000 Signaling Server Software Install Tool (sse-x.xx.xx)
=====================================================================
Please select the Network Routing Service (NRS) configuration for this
Signaling Server.
Please enter:
<CR> -> <a> - H.323 Gatekeeper and SIP Redirect/Proxy Server.
<b> - H.323 Gatekeeper only.
<c> - SIP Redirect/Proxy Server only.
Enter Choice>
CS 1000 Signaling Server Software Install Tool (sse-x.xx.xx)
=====================================================================
Please select the type of Network Routing Service (NRS) for this
Signaling Server.
Please enter:
<CR> -> <a> - Primary.
<b> - Alternate.
<c> - Failsafe.
Enter Choice>