Filter
Top Products
Installing and connecting CS 1000E hardware Page 113 of 466
Communication Server 1000E Installation and Commissioning
• TLAN (telephony) network interface
• one RS-232 (local console) port
Figure 28
Shielded 50-pin to Serial/ELAN/TLAN adapter
Procedure 14
Inserting a Shielded 50-pin to Serial/ELAN/TLAN adapter
1 Open the Media Card package NTDU41CA.
2 Remove the Shielded 50-pin to Serial/ELAN/TLAN adapter.
3 Save the other items from the package for use in “Installing a
CompactFlash” on page 328.
4 Insert the adapter, shown in Figure 28, into the connector Card 1, Card 2,
Card 3, or Card 4 that corresponds to the location of the Media Card.
For example, in Figure 29 on page 114, the Media Card is installed in card
slot 1. Therefore, the adaptor is installed in connector Card 1.
End of Procedure
Identification Label
TLAN RJ-45
LAN socket
ELAN RJ-45
LAN socket
RS-232 Connector
Voice Gateway Media Card
maintenance port
50-pin connector