Filter
Top Products
Configuring Call Park 85
4 Click Update. The Dial Rules page appears showing the new dial rule.
Deleting Dialing
Rules
To delete a dial rule:
1 From the left-hand side of the main page, under the Dial Plans heading,
click Dial Rules. The Dial Rules page appears.
2 From the Dial Rules page, either an individual or multiple dial rules can be
deleted.
This deletes the dial rule completely. Any dial plan associated with this
dial rule will no longer have this dial rule associated with it.
■ Individual — Click the checkbox preceding the dial rule and then click
delete from the Action column in the same row as the dial rule.
■ Multiple — Click the checkbox preceding the dial rules and then click
Delete Selected.
The Dial Rules page refreshes showing the deleted dial rule.
Configuring Call
Park
This section provides information on how to globally configure call park
for a network domain. This feature allows end users to place a call on
hold so it may be retrieved from another phone in the system. For
example, if you are on an active call at your phone, you can park the call
with an access code and the authentication server automatically reserves
a call session. Then you can go on a different phone, dial the access code,
and continue the call.
Timeout This indicates the number of seconds that the phone
will wait for another digit to be dialed before it places
the call.
Note: The default timeout is 5 seconds.
Pattern This represents a defined string of numbers. When
the defined string of numbers dialed matches a
configured pattern, the phone number being dialed is
automatically placed once the configured Timeout
expires and as long as it is within the range of the
configured length.
Table 20 Dial Rule Parameter Field Descriptions (continued)
Field Description