Filter
Top Products
Managing End Points 111
Editing End Points To edit end points:
1 From the directory provisioning page, click End Points.
The List of End Points page appears.
2 From the List of End Points page, edit end points by clicking an end point
from the Name column.
3 Edit the necessary fields according to the descriptions provided below:
■ ID — This value is automatically generated and cannot be changed.
■ Active —
■ Yes = active
■ No = inactive
■ Description — Unique description of the end point.
■ Click either the IP Address or DNS radio button and type an IP address
or DNS in the field below.
■ IP Port — The IP Port number of the address type, which is
automatically entered depending on end point type.
■ Transport Protocol — Defines the transport protocol to use for the end
point.
■ Signaling Protocol — Defines the signaling protocol for the end point.
■ Call Model — Defines the call model to use for the end point.
4 Click Save. The List of End Points page appears, showing the edited end
points.
Deleting End Points To delete end points:
1 From the directory provisioning page, click End Points.
The List of End Points page appears.
2 From the List of End Points page, either an individual or multiple end
point can be deleted.
■ Individual — From the Action column, click Delete in the same row as
the end point.
■ Multiple — Check each box preceding the Name column and then
click Delete Selected.