Filter
Top Products
160 CHAPTER 4: CONFIGURING THE CALL PROCESSOR
Adding Primary and
Secondary
Authentication
Servers
Authentication servers can be added using either EMS or through the
Remote CLI Application.
Through EMS
To add an authentication server through EMS:
1 Log into EMS.
2 From the Explorer tab, navigate to the 3Com Sip Call Processor.
3 From the Properties tab, click Authentication Servers.
4 Click Add.
The Add row to table window appears.
5 Fill in the fields according to the descriptions in Table 29.
6 Click OK.
The authentication server is added to the Authentication Server tab.
Through the CLI
To add a primary authentication server through the CLI:
1 Log onto the server hosting the Call Processor.
2 Navigate to the /opt/3com/VCX/callprocessor/remoteCli/bin.
3 Start the Remote CLI application.
4 From the prompt (>) enter:
config authc use=false
config auths pri=1
IpAddress=<IP address of primary authentication
server>
config auths pri=1 LocalIpAddress=<IP address of call processor>
Table 30 Authentication Server Tab Descriptions in EMS
Attribute Description Values
Priority Specifies the priority of the
authentication server.
Integer: 1 - 5
1 = primary)
2 = secondary
AuthServerIpAddress Specifies the IP Address of the
authentication server.
IP Address String
xxx.xxx.xxx.xxx (0 - 255)
LocalIpAddress Specifies the Local IP Address
for the authentication server
client.
IP Address String
xxx.xxx.xxx.xxx (0 - 255)