Filter
Top Products
Configuring Patterns 55
Deleting an
Attendant Console
To delete an attendant console:
1 From the left-hand side of the main page, click Attendant Console.
The Attendant Console page appears.
2 Click the checkbox(es) preceding the MAC Address(es) for each attendant
console(s) you want to delete.
3 Click Delete Selected.
A pop-up window appears verifying you really want to delete the
attendant console.
4 Click OK.
5 The Attendant Console page refreshes, verifying the attendant console
was deleted.
Attendant Console
Busy Lamp Flash
Descriptions
The attendant can use the Busy Lamp Flash (BLF) indicators that are next
to each extension on the attendant console to determine the state of an
end user’s telephone. Any telephone that is mapped to a button on the
attendant console use the BLF indicators.
The BLF indicators are coded as follows:
Configuring
Patterns
This section provides information on how to view, add, and delete
patterns.
To add a pattern:
1 From the left-hand side of the main page, click the Patterns heading.
The List Patterns page appears.
2 From the List Patterns page, click Add Pattern.
The Add Pattern page appears. See Figure 11.
Table 17 Attendant Console BLF Descriptions
BLF Indicator State Description
Off The end user’s phone is not busy (on-hook) and available.
On (solid light) The end user’s phone is busy (off-hook) and in use.