Filter
Top Products
Configuring the SIP Phone Downloader 189
In super user mode, type the following to print a list of the various
downloaders:
ifconfig -a
1 Launch EMS and discover the server that the SIP Phone Downloader is
installed on. The navigation tree looks similar to Figure 58.
Figure 58 SIP Phone Downloader Configuration Tab in EMS
2 Click 3COM Application Downloader.
3 From the Properties tabs, click Configuration.
4 Set the following attributes by double-clicking each field:
a LocalDeviceNameAdmin — Use //dev//hme0, which is your NIC
device.
Make sure the NIC device has read and write permissions for the
cworks user; otherwise, change the permission on this device or run
this application as the super user.
b LocalIPAddressAdmin — the IP Address of the server the SIP Phone
Downloader is installed on. It picks a default.
c LocalIPPortAdmin — Do not change this since it cannot be
configured on the 3Com phone.