Filter
Top Products
Supported VCX CDR Field Descriptions 185
The program uninstalls. You should reboot your machine once the
uninstallation occurs.
Supported VCX CDR
Field Descriptions
This section contains information about each of the supported CDR fields
from the call processor. These CDRs are captured by the Accounting
Server and can either be sent to the Billing Support Server or made into a
flat file. These fields can be viewed from the Call Records utility from the
VCX tab.
Table 37 Call Processor CDR Fields
VCX Fields Description
CDR_ID Unique identifier for a CDR within the AccountingData
table.
VERSIONID Identifies the CDR version for future maintainability.
ACCOUNTID Identifies how the account number was determined. Values
might be user input, calling party number, or no account
number provided.
CALLINGPARTY
E164ADDRESS
An E.164 number from which the call is placed to the
access gateway. Only the phone extension is displayed,
not the entire sip identifier such as sip:<telephone
extension>@<host server>.
CALLEDPART
E164ADDRESS
An E.164 number of the called destination. Only the phone
extension is displayed, not the entire sip identifier such as
sip:<telephone extension>@<host server>.
INGRESSGATEWAY
IPADDRESS
IP address of the access gateway.
CALLTYPE The type of call placed.
1 – Phone to phone
2 – PC to phone
3 – Phone to PC
4 – Fax to fax
CALLSTARTIME
INGRESSGWACCESS
Date and time when the call accessed the ingress gateway.
CALLSTARTTIME
ANSWERED
Date and time when the call is answered. For example,
receipt of answer supervision until call disconnect.
CALLENDTIME Date and time when the call disconnects. This is typically
the time when the billing stops.
CALLDURATION
CONNECTTODISCONN
Call duration in seconds from connect to disconnect.
(continued)