Filter
Top Products
Configuring Emergency Services 75
Deleting IP Addresses
from an ERL
To delete an IP address range from an ERL.
1 From the left-hand side of the Users main page, click the Emergency
Services heading.
The Emergency Response Locations page appears.
2 From the Location Settings heading, click IP Ranges within the same row
as the ERL you want to delete IP address from.
The List of IP Ranges for <Name of ERL> page appears.
3 Click the checkbox(es) preceding the IP address(es) you want to delete.
4 Click Delete Selected.
A pop-up window appears, verifying if you really want to delete the IP
address(es).
5 Click OK.
The List of IP Ranges for <Name of ERL> page refreshes verifying the IP
address(es) were deleted.
Editing Emergency
Digits
To edit an Emergency Digit for the ERL.
If Emergency service settings are changed, (for example, the gateway IP
address or emergency digits) they will not take effect until the telephones
are power cycled. A simple logout/login of the telephone is not adequate
enough.
1 From the left-hand side of the Users main page, click the Emergency
Services heading.
The Emergency Response Locations page appears.
2 From the Location Settings heading, click Emergency Digits within the
same row as the ERL you want to edit.
The Emergency Digits For <Name of ERL> page appears.
3 From the Emergency Number heading, click the telephone you want to
edit.
The Emergency Number page appears.
4 From the Emergency Number field, edit the emergency number.
5 Click Save.
The Emergency Digits For <Name of ERL> page refreshes showing the
new Emergency Digit.