Filter
Top Products
46 CHAPTER 1: CONFIGURING THE AUTHENTICATION SERVER
Figure 8 Selective Call Ring Tones Window
The Selective Call Ring Tones page contains two columns of information
available for each phone registration.
Table 14 lists each column and describes the type of information available
in that column.
Table 14 Ring Tones Page Descriptions
Column Description
Phone Number This field contains the phone number of an incoming call that
you want to assign a specific ring tone to.
The phone number must be entered in this format:
sip:<phone extension>@<IP address of server>.
Ring Tone This drop-down provides a selection of ring tones to assign to
specific incoming phone numbers.
Note: The ring tones are configured in from the Configuring
Ring Tones section.