Filter
Top Products
Configuring User Phones 33
Caller Identity This feature configures the following features:
■ Calling Number Delivery—Use this feature if the
phone supports the caller ID display feature. If so,
the phone light emitting diode (LED) will display the
number for incoming calls.
■ Calling Name Delivery—Use this feature if the
phone supports the caller ID display feature. If so,
the phone light emitting diode (LED) will display the
name for incoming calls.
■ Call Identity Suppression Universal—Use this
feature to make a call from a phone without
delivering the callee’s name and phone number to
any other phone. The access code must be within
the range of 10 through 99 and the first digit must
be an asterisk (*).
■ Enable Call Identity Suppression Per Call—When
enabled, this feature allows an end user to make a
single call from their phone WITHOUT delivering
their name and phone number to another phone.
Use this feature on a per call basis by dialing the
appropriate access code before dialing the actual
phone number. This feature overrides Call Identity
Suppression Universal if it is enabled. The access
code must be within the range of 10 through 99
and the first digit must be an asterisk (*).
Note: In order for this feature to immediately take
affect, you need to log out of the telephone and
then log back in, otherwise; the feature will not
take affect until the phone’s configured registry
timer setting has elapsed.
■ Disable Call Identity Suppression Per Call—Enable
this feature to allow end users to make a single call
from their phone WITH delivering their name and
phone number to another phone. Use this feature
on a per call basis by dialing the appropriate access
code before dialing the actual phone number.This
feature overrides Call Identity Suppression Universal
if it is enabled. In the access code field, enter an
access code in the format of *67. The access code
must be within the range of 10 through 99 and the
first digit must be an asterisk (*).
(continued)
Table 8 Calling Features for Phones (continued)
Calling Feature Description