Filter
Top Products
A
CALL PROCESSOR COMMAND LINE
INTERFACE COMMANDS
This chapter contains a complete listing of command line interface (CLI)
commands available for the call processor.
Call Processor CLI
Overview
The call processor can be configured from the server where the call
processor was installed by using the remoteCLI application. The
remote CLI application is located in the
/opt/3com/VCX/callprocessor/remoteCli/bin directory and uses the
same editing style as the text editor vi. The CLI interface provides a
complete view of all of the system configurables and allows you to
configure those parameters in real time. The configuration are
automatically written to the configuration file (nmdb.xml) to maintain
the configuration between application restarts.
The Remote CLI application retains 50 commands in its history, which
can be displayed using either the up or down arrows of the keyboard.
The Remote CLI application is not case sensitive and commands can
be truncated as long as they are still uniquely identified; otherwise, it
will use the first variable listed alphabetically.
For example, the following shows two ways to enter a command,
which provides the same output:
config CcTrusted RowStatus=4 Index=1 TrustedAddress=<IP
address>
OR
conf cct row=4 index=1 trustedaddr=<IP address>
For security the Remote CLI application can only be accessed from the
same machine the Call Processor is installed on.