Filter
Top Products
SNMP Support 149
SNMP Support The SNMP Common Agent needs to be enabled in order for the
accounting server to be recognized by SNMP MIB browsers such as
Enterprise Management Suite (EMS).
Enabling SNMP
Support
To enable SNMP support on the accounting server:
1 Log in as root.
2 Stop the common agent.
3 Stop the accounting server.
4 Go to the /opt/3com/VCX/acct/conf directory.
5 Open the acctconfig.xml file.
6 Under the SNMP Configuration tag, edit the acctconfig.xml file so the
SNMP Common Agent is enabled.
For example:
<!-- Enable or Disable SNMP Common Agent-->
<!-- Interface, 0 = OFF, 1 = ON -->
<ENABLED VALUE = "1"/>
7 Start the common agent.
8 Log in as cworks.
9 Start the accounting server.
If using EMS, rediscover the Linux Server before viewing/managing any of
the settings on the accounting server.
3Queue Protocol
Support
The accounting server supports 3Queue (3Q), a 3Com proprietary
protocol.
Enabling and
Disabling 3Q
Enable 3Q using either the server configuration file (acctconfig.xml) or
Enterprise Management Suite.
To enable and disable the 3Q protocol using EMS:
1 From the Explorer tab, select the accounting server.
2 From the Properties tab, select the 3 Q Protocol Configuration tab.