Filter
Top Products
30 CHAPTER 1: CONFIGURING THE AUTHENTICATION SERVER
Date Time Format Display Indicates the format of the phone’s LCD. An example of
what each format would like is provided.
■ MMM dd HH:mm — Nov 07 16:20
■ MMM dd hh:mm a — Nov 07 04:20 AM or
Nov 07 04:20 PM
■ MM dd HH mm — 11/07 16:20
■ MM dd HH mm — 11/07 04:20 AM or
11/ 07 04:20 PM
■ dd MMM HH mm — 07 Nov 16:20
■ dd MMM hh mm a — 07 Nov 04:20 AM or
07 Nov 04:20 PM
■ dd MM HH mm — 07/11 16:20
■ dd MM hh mm a — 07/11 04:20 AM or
07/11 04:20 PM
Local Time Zone Time zone of where the server is located.
Note: Daylight savings is not automatically set so you
need to set a specific time zone from the drop-down
menu.
Display Name The name to be displayed on the phone’s LCD.
Number of Lines The number of lines on the phones, varies by type of
phone.
Music On Hold Server Address of the Music on Hold server.
For example:
8475551212
Domain Ring Tone The type of ring tone you want to hear for phone calls
within your network domain, which use Caller ID.
Anonymous Ring Tone The type of ring tone you want to hear from anonymous
phone calls.
Other Ring Tone The type of ring tone you want to hear for phone calls
outside your network domain, which use Caller ID.
Voice Mail Server Address of the voice mail server, where your phone
connects to so you can hear your voice mail messages.
For example, it is the UMS pilot number.
Class of Service Indicates what phone numbers an end user is allowed to
either place or receive. The phone numbers are bundles
into a Class of Service, which are configured in the
“Configuring Class of Service” section on page 60.
(continued)
Table 7 Add Phone Field Descriptions (continued)
Field Description