Filter
Top Products
70 CHAPTER 1: CONFIGURING THE AUTHENTICATION SERVER
2 Click Add New ERL.
The Emergency Location page appears.
3 In the Location field, type a descriptive identifier for the location the ERL
is for based on geographic or physical location. For example, building
XYX, 1st floor. There is a 10 character limit.
4 In the Emergency Callback Phone field, type the phone number of the
contact person responsible for emergency situations within an
organization (for example, a security guard).
5 Click Save.
The ERL is added to the Emergency Response Location heading. See
Figure 18.
Figure 18 Emergency Defaults and Emergency Response Locations Window
6 Add an IP address range for the ERL.
This specifies which telephones should be included within this ERL (for
example, all telephones on the 1st floor of a building). Each phone in an
ERL is assigned an IP address from a range of IP addresses specified by
network address and netmask.
a From the Location Settings heading, click IP Ranges within the same
row as the ERL you want to configure.