Filter
Top Products
78 CHAPTER 1: CONFIGURING THE AUTHENTICATION SERVER
3 From the ELIN heading, click the ELIN you want to edit.
The Emergency Line ID Number page appears.
4 From the ELIN field, type the Emergency Location Identification Number.
5 In the Association Release Timer field, type in the amount of time you
want to leave the ELIN associated to the emergency caller. This number is
entered as a string in hours and the range is 1 through 24. This
association is used to callback the emergency caller. After the configured
time expires, the association between the emergency caller and ELIN is
dropped. In case an ELIN is not in use, it can be assigned to a new
emergency caller and the association with an older emergency caller is
overwritten with the association of the new emergency caller.
6 In the Usage Release Timer field, type in the maximum amount of time
you want to allow the ELIN to remain in use. This number is entered as a
string in hours and the range is 1 through 24. Normally, an ELIN is freed
when the emergency service provider goes on-hook before the
emergency caller goes on-hook,otherwise, the ELIN is kept in use for the
duration of this timer.
7 Click Save.
The Emergency Line ID Numbers <Name of ERL> page refreshes, showing
the ELIN.
Deleting Emergency
Lines from an ERL
To delete an Emergency Line from an ERL.
1 From the left-hand side of the Users main page, click the Emergency
Services heading.
The Emergency Response Locations page appears.
2 From the Location Settings heading, click Emergency Lines within the
same row as the ERL you want to delete an ELIN from.
The Emergency Line ID Numbers <Name of ERL> page appears.
3 Click the checkbox(es) preceding the Emergency Gateway IP Address(es)
you want to delete.
4 Click Delete Selected.
A pop-up window appears, verifying if you really want to delete the
Emergency Line(s).
5 Click OK.