Filter
Top Products
Configuring an Attendant Console 53
5 Map the phone extensions to the attendant console buttons. The
attendant console allows up to 100 telephones to be configured.
a From the Attendant Console page, under the Actions column, click
Extension Mappings in the same row as the attendant console you
want to edit.
The Attendant Console page appears, which allows the attendant
console buttons to be mapped to specific extensions.
b There are 100 fields available to configure telephone extensions. To
configure extensions 1-50, click the 1-50 button; and to configure
extensions 51-100, click the 51-100 button. Extensions should be
configured using this format:
sip:<extension>@<domain name or IP address>
For example, sip:1234@3com.com or sip:1234@10.10.0.0
c Click Save.
The Attendant Console page refreshes, and the extension mappings
are configured.
6 Reboot the telephones that where mapped to the attendant console.
Editing Feature
Mapping Buttons on
an Attendant Console
To edit a telephone feature button on an attendant console:
1 From the left-hand side of the main page, click Attendant Console.
The Attendant Console page appears.
2 From the Actions column, in the same row as the attendant console you
want to edit feature button mappings for, click Feature Mappings.
The Attendant Console page appears that allows feature mapping
configuration.
3 For each feature drop-down list, reassign a unique feature to each feature
button (1 through 4).
4 Click Save.
The Attendant Console page refreshes and the feature mappings are
reassigned.