Filter
Top Products
76 CHAPTER 1: CONFIGURING THE AUTHENTICATION SERVER
Deleting Emergency
Digits from an ERL
To delete an Emergency Digit from an ERL.
1 From the left-hand side of the Users main page, click the Emergency
Services heading.
The Emergency Response Locations page appears.
2 From the Location Settings heading, click Emergency Digits within the
same row as the ERL you want to delete an Emergency Digit from.
The Emergency Digits For <Name of ERL> page appears.
3 Click the checkbox(es) preceding the Emergency Digit(s) you want to
delete.
4 Click Delete Selected.
A pop-up window appears, verifying if you really want to delete the
Emergency Digit(s).
5 Click OK.
The Emergency Digits For <Name of ERL> page refreshes verifying that
the Emergency Digit(s) were deleted.
Editing Emergency
Gateway IP
Addresses from an
ERL
To edit an Emergency Gateway IP Address for the ERL.
If Emergency service settings are changed, (for example, the gateway IP
address or emergency digits) they will not take effect until the telephones
are power cycled. A simple logout/login of the telephone is not adequate
enough.
1 From the left-hand side of the Users main page, click the Emergency
Services heading.
The Emergency Response Locations page appears.
2 From the Location Settings heading, click Emergency Gateway IP within
the same row as the ERL you want to edit.
The Emergency Gateway IP Addresses For <Name of ERL> page appears.
3 From the IP Address heading, click the IP address you want to edit.
The Gateway IP Address page appears.
4 In the Gateway IP Address field, type the IP address of the gateway you
want to edit.