Filter
Top Products
Back-end Server Maintenance 215
4 Under the SNMP Configuration tag, verify that the SNMP Common Agent
is enabled.
It should look like this:
<!-- Enable or Disable SNMP Common Agent-->^M
<!-- Interface, 0 = OFF, 1 = ON -->^M
<ENABLED VALUE = "1"/>
5 If SNMP support is disabled, continue with Enabling SNMP Support.
Enabling SNMP Support
To enable SNMP support:
1 Log in as root.
2 Stop the common agent.
3 Stop the back-end server you want to enable SNMP support on.
4 Go to the /opt/3com/VCX/<schema>/conf directory.
5 Edit the XXXXconfig.xml file.
6 Under the SNMP Configuration tag, edit the XXXXconfig.xml file so the
SNMP Common Agent is enabled.
For example:
<!-- Enable or Disable SNMP Common Agent-->^M
<!-- Interface, 0 = OFF, 1 = ON -->^M
<ENABLED VALUE = "1"/>
7 Start the common agent.
8 Start the back-end server.
If using EMS, the 3Com VCX IP Telephony Server needs to be
rediscovered before viewing/managing any of the settings on the
authentication server. For configuration information, see SNMP Support
.
Restarting Systems
and Services in
Enterprise
Management Suite
After performing routine maintenance on either the accounting,
authentication, or directory server, the server must be restarted using
Enterprise Management Suite (EMS).
To restart the back-end server systems and services in EMS:
1 From the explorer tree, click the individual component.
2 Right-click and select Maintenance, and then click Hard Restart.