Filter
Top Products
Configuring the Back-end Server Plugins 163
Through the CLI
To add a primary directory server through the CLI:
1 Log onto the server hosting the Call Processor.
2 Navigate to the /opt/3com/VCX/callprocessor/remoteCli/bin.
3 Start the Remote CLI application.
4 From the prompt (>) enter:
config dirc use=false
config dirs pri=1
IpAddress=<IP address of primary directory server>
config dirs pri=1 LocalIpAddress=<IP address of call processor>
config dirc use=true
5 The CLI lists the new IP address of the directory server.
6 Exit the Remote CLI application.
To add a secondary authentication server through the CLI:
1 Log onto the server hosting the Call Processor.
2 Navigate to the /opt/3com/VCX/callprocessor/remoteCli/bin.
3 Start the Remote CLI application.
4 From the prompt (>) enter:
config dirc use=false
config dirs pri=2
IpAddress=<IP address of secondary directory
server>
config dirs pri=2 LocalIpAddress=<IP address of call processor>
config dirc use=true
5 The CLI lists the new IP address of the directory server.
6 Exit the Remote CLI application.
Editing Directory
Server IP Addresses
To edit a directory server IP address for the Call Processor using EMS:
1 Log into EMS.
2 From the Explorer tab, navigate to the 3Com Sip Call Processor.
3 From the Properties tab, click Directory Servers.