Filter
Top Products
Configuring Emergency Services 77
5 Click Save.
The Emergency Gateway IP Addresses For <Name of ERL> page refreshes,
showing the Emergency Gateway.
Deleting Emergency
Gateway IP
Addresses from an
ERL
To delete an Emergency Gateway IP Address from an ERL.
1 From the left-hand side of the Users main page, click the Emergency
Services heading.
The Emergency Response Locations page appears.
2 From the Location Settings heading, click Emergency Gateway IP within
the same row as the ERL you want to delete the Emergency Gateway IP
address from.
The Emergency Gateway IP Addresses For <Name of ERL> page appears.
3 Click the checkbox(es) preceding the Emergency Gateway IP Address(es)
you want to delete.
4 Click Delete Selected.
A pop-up window appears, verifying if you really want to delete the
Emergency Digit(s).
5 Click OK.
The Emergency Gateway IP Addresses For <Name of ERL> page refreshes,
verifying the Emergency Gateway(s) were deleted.
Editing Emergency
Lines to an ERL
To edit an Emergency Line for the ERL.
If Emergency service settings are changed, (for example, the gateway IP
address or emergency digits) they will not take effect until the telephones
are power cycled. A simple logout/login of the telephone is not adequate
enough.
1 From the left-hand side of the Users main page, click the Emergency
Services heading.
The Emergency Response Locations page appears.
2 From the Location Settings heading, click Emergency Lines within the
same row as the ERL you want to edit.
The Emergency Line ID Numbers <Name of ERL> page appears.