Filter
Top Products
B
MANUALLY CONFIGURING THE
AUTHENTICATION SERVER
3Com recommends configuring the authentication server through the
provisioning server. See “Configuring the Authentication Server” on
page 19. This appendix describes the tables used when configuring
users or other authentication functions in large quantities (in bulk).
Information on how to bulkload data into the authentication server
database is provided in “Common Commands” on page 315.
Authentication File
Location
The authentication server bulkload files are located here:
/opt/3com/VCX/auth/db/cwauth/bulkload.
Configuring
Authentication
Server Database
Tables
This section outlines the text files that are used to configure the
authentication sever.
Any table (text file) not described in this section is not supported.
Configuring
bridge_map
The bridge_map table links the primary URI to a secondary URI (allowed
bridge) with an authorized line that the secondary URI can receive call on
for the primary URI.
Table 40 bridge_map_data.txt Fields
Column Name Description Value
PRIMARY_URI_ID This refers to a unique identification
number for the primary URI.
Integer
ALLOWED_BRIDGE_URI_ID This refers to a unique identification
number for the secondary URI.
Integer
PHONE_LINE_NO This refers to the line that is authorized
to be received by the secondary URI for
the primary URI.
Integer