Filter
Top Products
Server Configuration 139
section on page 94, and are usually Tier 1 components such as a
Gateway.
b To enable Direct Requestors, check the Direct Requestors box. Direct
Requestors are provisioned in the “Managing Requestors” section on
page 94, and are usually Tier 2 components such as a Gatekeeper or
SIP Proxy.
c To enable Holidays, check the Holiday box. Holidays are provisioned in
the “Managing Holidays” section on page 97.
d To enable Week Day Bands and/or Day Time Bands check the
Week/Day Bands box. Week Day Bands and/or Day Time Bands are
provisioned in the “Managing Week Day Bands” section on page 99
and “Managing Day Time Bands” section on page 102.
e To enable Calendar Bands, check the Calendar Bands box. Calendar
Bands are provisioned in the “Managing Calendar Bands” section on
page 105.
3 URI Translation is an optional feature. To enable URI Translation, check the
URI Translation boxed. For more information on URI Translation, see the
“Managing URI Translation” on page 134. See step 1 for more
information on the sourced based routing options.
4 To enable routes to globally use the same black lists and/or white lists,
check the Black/White Listing box. Black lists and white lists are
provisioned in the “Managing End Point Black Lists” section on page 114
and “Managing End Point White Lists” section on page 116.
5 Click Save.
Resetting Globally
Provisioned Routes
To reset globally provisioned routes in a directory server database:
1 From the directory provisioning page, as shown in Figure 24, click Server
Configuration.
The Directory Server Configuration page appears.
2 Click Reset. This disables all global features and options.
3 To create a new global configuration, see step 2 through step 5 in the
“Globally Configuring Routes” section on page 138.