Filter
Top Products
200 CHAPTER 9: MAINTAINING THE V7000 IP TELEPHONY SUITE
To save the 3Com VCX IP Telephony Server configuration in EMS:
1 From the Explorer tab, right-click 3Com VCX IP Telephony Server.
2 From the pop-up menu, select Configuration and then select Backup.
The progress is shown in the Job Progress section of the EMS GUI.
When the save is finished, the Working icon changes to a Finished icon.
The default directory for .CFM files is: ...3Com\EMS\backups. The file
name is saved as follows: <component IP
address>_YYYYMMDDHHMMSS.cfm. For example,
192.168.120.110_20041029185959.cfm.
Restoring the 3Com
VCX IP Telephony
Server Configuration
in EMS
The 3Com VCX IP Telephony Server configuration can be restored from a
saved CFM file. The CFM file restores any SNMP manageable system
configurables. It automatically chooses the correct CFM file to restore to
the same server the backup was taken from. A backup cannot be applied
from one server to another.
To restore the 3Com VCX IP Telephony Server configuration in EMS:
1 From the Explorer tab, right-click 3Com VCX IP Telephony Server.
2 From the pop-up menu, select Configuration and then select Restore
Current.
The progress is shown in the Job Progress section of the EMS GUI.
When the restoration is finished, the Working icon changes to a Finished
icon.
Changing a Daylight
Savings and
Timezone
Configuration
In a VCX system the daylight savings and timezone configuration should
only be modified using the
vcx-config-network -- wizard tool that is
located on the VCX server. Even though it appears the timezone and
daylight savings time can be modified using Enterprise Management
Suite (EMS), all configurations are not currently supported since you
cannot change the daylight savings status (enabled to disabled or vice
versa) from the original configuration. Also, not as many timezone
options are available in EMS as there are through the
vcx-config-network -- wizard tool.
When using the vcx-config-network -- wizard tool, both the
Daylight Savings and Timezone preference are configured at the same
time.