Filter
Top Products
152 CHAPTER 4: CONFIGURING THE CALL PROCESSOR
Configuration
Methods
There are two recommended means of configuring the Call Processor.
This section provides a simple overview of each method, which are
listed in order of usability (easiest listed first).
■ Through the Enterprise Management Suite (EMS)
■ Through the Command Line Interface
Through EMS
EMS is an optional management tool that offers a simple method to
configure the call processor. EMS uses an SNMP interface that allows
for easy viewing and management of all of the call processor
configurables. See the 3Com Enterprise Management Suite User
Guide for basic EMS information.
Through CLI The call processor can be configured from the server where the call
processor was installed by using the remoteCLI application.
See the
“Call Processor Command Line Interface Commands” on page 221.
Configuring Call
Control
This section provides information on how to configure the Call Control
Plugin (CcCfg).
Through EMS To configure the Call Control Plugin using EMS:
1 Log into EMS.
2 From the Explorer tab, navigate to the 3Com Sip Call Processor.
3 From the Properties tab, click Configuration.
4 Double-click any of the fields under the 3COM Sip Call Processor column
and configure according to the descriptions within Table 27.
Table 27 EMS Call Controller Call Control Configurable Descriptions
Attribute Description Range Default
AnonymousCallerString This configurable determines what value the Call
Processor will expect in the from field of an
incoming SIP INVITE to indicate that the caller is
supressing their caller Id. This is one of the ways in
which the Call Processor determines that an
incoming caller id is suppressed.
any string anonymous
(continued)