Filter
Top Products
110 CHAPTER 2: CONFIGURING THE DIRECTORY SERVER
3 From the drop-down menu, select a type of end point to add, see
Table 23 for possible end point combinations:
■ Type — The device type that is associated with the end point. The
supported devices are listed in Table 23.
■ Active —
■ Yes = active
■ No = inactive
■ Description — Unique description of the end point.
■ Click either the IP Address or DNS radio button and type an IP address
or DNS in the field below.
■ IP Port — The IP Port number of the address type, which is
automatically entered depending on end point type.
■ Transport Protocol — Defines the transport protocol to use for the end
point.
■ Signaling Protocol — Defines the signaling protocol for the end point.
■ Call Model — Defines the call model to use for the end point.
■ Foreign Gatekeeper Secret — Not Supported
* 3Com only supports default SIP Ports.
4 Click Save. The List of End Points page appears, showing the end point
added.
Table 23 Supported End Point Combinations
Default
IP Port
Transport
Protocol
Signaling
Protocol
Call Model
Foreign
Gatekeeper Secret
Gateway
5060* TCP or UDP SIP Redirect, Fully Routed,
or Partially Routed
N/A
Gatekeeper
Not
Supported
Not
Supported
Not Supported Not Supported Not Supported
Terminal
5060* TCP or UDP SIP Redirect, Fully Routed,
or Partially Routed
N/A
Foreign Gatekeeper
Not
Supported
Not
Supported
Not Supported Not Supported Not Supported
Session Manager
Not
Supported
Not
Supported
Not Supported Not Supported Not Supported
Call Processor
5060* TCP or UDP SIP Redirect, Fully Routed,
or Partially Routed
N/A