Filter
Top Products
158 CHAPTER 4: CONFIGURING THE CALL PROCESSOR
The Add row to table window appears.
5 Fill in the fields according to the descriptions in Table 29.
6 Click OK.
7 The accounting server is added to the Accounting Server tab.
Through the CLI
To add a primary accounting server through the CLI:
1 Log onto the server hosting the Call Processor.
2 Navigate to the /opt/3com/VCX/callprocessor/remoteCli/bin.
3 Start the Remote CLI application.
4 From the prompt (>) enter:
config acctc use=false
config accts pri=1
IpAddress=<IP address of primary accounting
server>
config accts pri=1 LocalIpAddress=<IP address of call processor>
config acctc use=true
5 The CLI lists the new IP address of the accounting server.
6 Exit the Remote CLI application.
To add a secondary accounting server through the CLI:
1 Log onto the server hosting the Call Processor.
2 Navigate to the /opt/3com/VCX/callprocessor/remoteCli/bin.
3 Start the Remote CLI application.
4 From the prompt (>) enter:
Table 29 Accounting Server Tab Descriptions in EMS
Attribute Description Values
Priority Specifies the priority of the
accounting server.
Integer: 1 - 5
1 = primary)
2 = secondary
AcctServerIpAddress Specifies the IP Address of the
accounting server.
IP Address String
xxx.xxx.xxx.xxx (0 - 255)
LocalIpAddress Specifies the Local IP Address
for the accounting server
client.
IP Address String
xxx.xxx.xxx.xxx (0 - 255)