Filter
Top Products
74 CHAPTER 1: CONFIGURING THE AUTHENTICATION SERVER
Deleting ERLs To delete an ERL:
1 From the left-hand side of the Users main page, click the Emergency
Services heading.
The Emergency Response Locations page appears.
2 Click the checkbox(es) preceding the ERL(s) you want to delete.
3 Click Delete Selected.
A pop-up window appears, verifying if you really want to delete the
ERL(s).
4 Click OK.
The Emergency Response Location page refreshes, verifying the ERL(s)
were deleted.
Editing IP Addresses
of an ERL
To edit an IP address range for the ERL.
If Emergency service settings are changed, (for example, the gateway IP
address or emergency digits) they will not take effect until the telephones
are power cycled. A simple logout/login of the telephone is not adequate
enough.
1 From the left-hand side of the Users main page, click the Emergency
Services heading.
The Emergency Response Locations page appears.
2 From the Location Settings heading, click within the same row as the ERL
you want to edit.
The List of IP Ranges for <Name of ERL> page appears.
3 From the Network IP heading, click the IP address range you want to edit.
The IP Address Range page appears.
4 In the IP Address field, type the IP network address for phones you want
to include in this ERL.
5 In the Subnet Mask field, type the subnet mask for this IP address range.
6 Click Save.
The List of IP Ranges for <Name of ERL> page refreshes showing the new
IP address range.