Filter
Top Products
188 CHAPTER 8: CONFIGURING THE SIP PHONE DOWNLOADER
3 Under Config, configure the following tags:
■ LocalDeviceName — This is your NIC device, such as //dev//dmfe0.
Make sure the NIC device has read and write permissions for the
cworks user; otherwise, change the permission on this device or run
this application as the super user.
■ MaxSessions — A session is used to download a specific device. The
max sessions determines how many devices can be downloaded all at
once (parallel). Increasing the max sessions can speed up the overall
reboot time but can impact the other server activities such as the
Unified Messaging Suite. Increasing the max sessions can also cause
problems if a large number of devices are attempting to download via
a restricted bandwidth WAN link. 3Com recommends leaving the
default setting of 10 to maintain a good performance and reboot time
ratio.
■ LocalIPAddress — IP Address of the server the SIP Phone Downloader
is installed on.
4 Save the SipPhoneDL.xml file.
Through Enterprise
Management Suite
Use EMS configure the SIP Phone Downloader. The Local Device Name
needs to be changed to what ever your host is configured as.
Choose the one of the 2 Ethernet interfaces that you want this SIP
phone downloader to use.