Filter
Top Products
168 CHAPTER 5: CONFIGURING TELEPHONES
■ Test the telephone buttons, display panel, and LEDs
■ Clear all device settings
■ Specify the MAC address of the NCP (test environment option)
■ View firmware information (technician option)
■ Test connectivity
■ Restart the telephone
Assessing the
Telephone LUI Menus
To access the LUI menu:
1 Cycle power to the telephone by disconnecting and then reconnecting its
power connector, and then start the LUI utility (as described in step 2,
next) before the telephone finishes its download of code from the call
processor.
For telephones that use a powered Ethernet cable instead of a power
adapter, disconnect and then reconnect the Ethernet cable.
2 To start (or exit from) the LUI utility:
■ On the 3Com 3102 Business Telephone, press the Program button:
■ On 3Com 2102 and 2102-IR Business Telephones, press the Program
button:
■ On 3Com 3101 or 3101SP Basic Telephones, press the Select button
(the center button in the cursor control button group):
■ On the 3Com 2101 Basic Telephone, press the MSG button:
The buttons you use to enter information vary with each type of
supported telephone:
■ 3Com 3102 Business Telephone, see Figure 52 on page 169.
■ 3Com 3101 or 3101SP Basic Telephones, see Figure 53 on page 170.
■ 3Com 2102 and 2102-IR Business Telephones, see Figure 54 on
page 171.