Filter
Top Products
C
MANUALLY CONFIGURING THE
DIRECTORY SERVER
3Com recommends configuring the directory server through the
provisioning server. See “Configuring the Directory Server” on
page 89. This appendix describes the tables used when configuring
call routes or other directory server functions in large quantities (in
bulk).
Information on how to bulkload data into the authentication server
database is provided in “Common Commands” on page 315.
Manually
Configuring a Call
Route by Bulk
Loading
Use the text files in the /opt/3com/VCX/dir/db/cwdir/bulkload folder to
indirectly edit the data in the databases and provision a call route.
To configure a call route through bulk loading:
1 If the Destination URI requires translation, a URI translation must be
added.
a Verify that the required record is in the supporting tables. The
supporting tables include the requestors, day_time_bands,
week_day_bands, date_time_bands, holidays, and patterns table.
b Add the match pattern ID and translation string to the
desturi_translation table.
2 Add an end point. Go to the “Configuring ep_data.txt” section for more
information. Be sure to look at Table 83 for information on which fields
must be filled out.
a If the end point needs an associated black list, then a record to the
ep_blist_map table. The black list pattern must be in the patterns
table.
b If the end point needs an associated white list, then a record to the
ep_wlist_map table. The white list pattern must be in the patterns
table.