Filter
Top Products
124 CHAPTER 2: CONFIGURING THE DIRECTORY SERVER
5 Click Update. The Route - EndPoint page refreshes, showing the updated
end points.
Unassigning End
Points or Bundles
Assigned to Routes
To unassign bundles and/or end points assigned to routes:
1 From the directory provisioning page, as shown in Figure 24, click Routes.
The List of Routes page appears.
2 From the List of Routes page, click Manage EndPoints from the Action
column for the route that needs to have an end point and/or bundle
unassigned from.
The Route - EndPoint page appears, showing all of the end points and/or
bundles associated with that route.
3 From the Route - EndPoint page, either an individual or multiple end
points and/or bundles can be unassigned.
■ Individual — From the Action column, click UnAssign in the same row
as the end point and/or bundle.
■ Multiple — Check each box preceding the Name column and then
click Unassign Selected.
The Route - EndPoint page refreshes, showing the updated route.
Assigning Out Dial
Patterns for Routes
To assign out dial patterns to either an end point or bundle of a route:
1 From the directory provisioning page, as shown in Figure 24, click Routes.
The List of Routes page appears.
2 From the List of Routes page, click Manage EndPoints from the Action
column for the route that needs to have an out dial pattern assigned to it.
The Route - EndPoint page appears, showing all of the end points and/or
bundles associated with that route. See Figure 46.