Filter
Top Products
156 CHAPTER 4: CONFIGURING THE CALL PROCESSOR
Through EMS
To edit a trusted endpoint to a Call Processor using EMS:
1 Log into EMS.
2 From the Explorer tab, navigate to the 3Com Sip Call Processor.
3 From the Properties tab, click Trusted Endpoints.
4 Double-click the field (s) you want to edit under the IpAddress column.
5 High-light what you want to edit.
6 Type in the new information.
7 Click in a different field to activate the Save all button.
8 Click Save all.
The new information is added and is listed in the IpAddress column of
EMS.
Deleting Trusted
Endpoints
This section describes how to delete trusted endpoints from a Call
Processor.
Through the CLI
To delete a trusted endpoint from the Call Processor using the CLI:
1 Log onto the server hosting the Call Processor.
2 Navigate to the /opt/3com/VCX/callprocessor/remoteCli/bin.
3 Start the Remote CLI application.
./remoteCli -callprocessor
4 From the prompt (>) enter:
config CcTrusted RowStatus=6 index=<index ID>
TrustedAddress=<IP address of endpoint>
See Table 28 for descriptions and values of the configurables.
5 To exit the Remote CLI application, enter:
exit
Through EMS
To delete a trusted endpoint to the Call Processor using EMS:
1 Log into EMS.
2 From the Explorer tab, navigate to the 3Com Sip Call Processor.