Filter
Top Products
Back-end Server Maintenance 203
■ green — it is running
■ red — it is down
From a Command Prompt
To verify the state of the Call Processor from a command prompt:
1 Log into a machine hosting the Call Processor as root.
2 Enter the following command:
ps -ef | grep call
■ Running — the Call Processor Process ID is listed.
■ Not Running — nothing is listed except the root ID.
Back-end Server
Maintenance
This section provides maintenance tasks that are specific to the
accounting, authentication, billing support, and directory servers.
Starting the
Accounting,
Authentication, and
Directory Servers
To start either the accounting, authentication, or directory server:
1 Login to the server hosting the back-end server you want to start.
2 Go to the /opt/3Com/VCX/<back-end server>/bin.
where <back-end server> equals:
accounting server —
acct
authentication server — auth
directory server — dir
3 Enter ./<back-end server> start
Stopping the
Accounting,
Authentication, and
Directory Servers
To stop either the accounting, authentication, or directory server:
1 Login to the server hosting the back-end server you want to stop.
2 Go to the /opt/3Com/VCX/<back-end server>/bin.
where <back-end server> equals:
accounting server —
acct