Filter
Top Products
190 CHAPTER 8: CONFIGURING THE SIP PHONE DOWNLOADER
5 Click Save all.
Device Mapping
through EMS
The SIP Phone Downloader application comes with two images:
ndset_boot_19 and nbset_19, and the boot version is C.403. All images
need to be stored in the $HOME/sipdl/images.
To configure the device mapping:
1 Launch EMS and discover the server that the SIP Phone Downloader is
installed on. The navigation tree looks similar to Figure 59.
Figure 59 SIP Phone Downloader Device Mapping Tab in EMS
2 Click 3Com Application Downloader.
3 From the Properties tabs, click Device Mapping.
4 Set the following attributes by double-clicking each field:
■ BootFilename — SIP phone downloader code and firmware code
provided by the NBX phone. This value should be set to
nbset_boot_19.
■ BootVersion — Version of the firmware code. This value should be
set to C403.