3Com V7000 Telephone User Manual


 
72 CHAPTER 2: INSTALLING AN IP TELEPHONY AND MESSAGING SERVER
Sample Services Configuration Script — Branch Office Server (continued)
At a branch office, the password for access to the regional office system's
'cworks' account is required. At a regional office or on a standalone
system, specify the 'cworks' password for access to *this* system.
Login Password :
Login Password (confirm) :
CAUTION: Enter the password for the cworks account on the regional
office Authentication and Directory server. The default password is
cworks. 3Com strongly recommends that customers change default
passwords for security reasons. Consult your VCX system administrator to
determine the appropriate password to enter.
Do you wish to change any of the Auth & Dir Service parameters? [N] :
Review the information for accuracy and if it is correct, press the Enter or
Return key. If you want to change any of the information, enter Y.
------------ Configuring additional parameters for Common Agent ------------
The Trap Destination specifies the IP address to be used as a destination
when this system sends SNMP traps.
Trap Destination :
Enter the IP address of the PC on which your network management
software runs.
The Trap Community String provides a community string to be used when
sending SNMP traps to the trap destination.
Trap Community String : public
CAUTION: Press the Enter or Return key to accept the default answer
(public). If you want to specify a different trap community string, enter it
instead. 3Com strongly recommends that customers change this string
for security reasons.
The Write Community String specifies the community string to be used by a
management station when sending write requests to this system.
Write Community String : private
CAUTION: Press the Enter or Return key to accept the default answer
(private). If you want to specify a different write community string, enter
it instead. 3Com strongly recommends that customers change this string
for security reasons.