3Com V7000 Telephone User Manual


 
284 CHAPTER 11: MAINTENANCE
Sample VCX Reconfiguration Script (continued)
The Write Community String specifies the community string to be used by a
management station when sending write requests to this system.
Write Community String : private
Press the Enter or Return key to accept the existing write community
string or enter a new string.
The Read Community String specifies the community string to be used by a
management station when sending read requests to this system.
Read Community String : public
Press the Enter or Return key to accept the existing read community
string or enter a new string.
Common Agent supports a management station authentication feature.
Answering 'Y' here will allow only a set of pre-identified SNMP management
stations to manage the system. (You will be able to enter IP addresses of
authorized management stations next. Authorized management stations can
also be configured using EMS or another management station at a later
point.)
Enable management station authentication? [N] :
Press the Enter or Return key to accept the default answer (N) and
continue with no management station authentication. Enter Y if you
want to specify up to four management station IP addresses.
Do you wish to change any of the Common Agent parameters? [N] :
Press the Enter or Return key to accept the default answer (N) and use the
data that you have accepted or modified. Enter Y to make additional
changes.
----------------------------------------------------------------------------
VCX reconfiguration is now complete. Before the information just entered
is saved, you have the option of reviewing and changing parameters for each
VCX service at a detailed level. This is not needed in most cases and is
recommended only for advanced users.