Filter
Top Products
61
Configuring a Branch Office IP Telephony and Messaging Server
To begin the configuration process, enter this command:
vcx-setup
The configuration script starts. The first portion deals with network
configuration.
Sample Network Configuration Script — Branch Office Server
---------------------------------------------------------------------------
-------------------- VCX Network Configuration Utility --------------------
---------------------------------------------------------------------------
This wizard sets up networking and related services.
Configure networking now? [yes] :
Press the Enter or Return key to accept the suggested answer (yes).
--------- Configuring Dynamic Host Configuration Protocol (DHCP) ----------
VCX servers can use DHCP for automated configuration, but this requires
that the DHCP server is configured to provide the proper options. Unless
you know that your environment is set up in this way, you should say 'no'
here and configure static network parameters.
Use DHCP on eth0 to configure network parameters? [yes] : no
IP addresses for VCX servers must be static addresses. Enter no to
configure the network parameters for eth0 manually.
-------------------------- Configuring Hostname ---------------------------
Enter system hostname :
Enter the name that you want to use for this branch office server.
Unqualified host names must conform to the rules outlined in “
Host
Names” in Chapter 1.