3Com V7000 Telephone User Manual


 
336 APPENDIX B: AUTOMATED BRANCH OFFICE INSTALLATION
ISC Server This section describes how to configure DHCP services on a DHCP server
(dhcpd) from the Internet Systems Consortium. The sample configuration
file contains comments to help you understand the parameters and how
to configure them.
CAUTION: The ISC DHCP server is not provided as part of the VCX system
software and should not be installed on any VCX server.
Configuration File All DHCP parameters are specified in a file called dhcpd.conf, typically
located here:
/etc/dhcpd.conf
CAUTION: Verify that the dhcpd.conf file is located in the same place on
your Linux or UNIX system. Not all systems use the same file locations. To
specify a different location for the
dhcpd.conf file, start the DHCP server
using the
-cf option.
Sample File The sample file contains branch office configuration information only. The
information in the sample file focuses on what you need to add to your
existing
dhcpd.conf file. Comments within the sample file help you to
determine which parameters must be changed when you copy the
sample section and modify it to add another branch office.