3Com V7000 Telephone User Manual


 
Configuration Files 335
Sample Media Gateway Configuration File (continued)
;The FXO channels, Trunk group #1, will be selected according to
;"Cyclic Ascending (next available channel)
;
;The FXS channels, Trunk group #2, will be selected according to
;their Phone Numbers
TrunkGroupSettings = 1,1
TrunkGroupSettings = 2,0
For each trunk group, specify these parameters:
Hunt Group ID
Channel Select Mode
0 — By phone number
1 — Cyclic Ascending
2 — Ascending
3 — Cyclic Descending
4 — Descending
5 — Number + Cyclic Ascending
;------------------------------------
; HuntGroup Routing Table
;------------------------------------
;Incoming IP calls with called number: 201 to 202 will be
;routed to FXS module, all other calls will be routed to FXO
;module.
PSTNPrefix = [201-202]#,2
PSTNPrefix = *,1
End of Sample Media Gateway Configuration File