3Com V7000 Telephone User Manual


 
Gateway Installation 249
To configure any V7122 digital gateway, use a browser to connect to the
gateway. Read and follow the instructions in the 3Com VCX V7122 Fast
Track Installation Guide, which comes with the unit.
You may need to configure the IP settings on your PC to initially connect
to the gateway. After you have connected, use the browser interface to
configure the IP settings of the gateway to conform to your network and
connect the gateway to the VCX Call Processing Server.
For each digital gateway:
The default IP address for trunks 1 through 8 is 10.1.10.10
The default IP address for trunks 9 through 16 is 10.1.10.11
The default subnet mask for all trunks is 255.255.0.0
The default IP address for the network gateway is 10.1.10.254
3Com V6000 Branch
Office Solution
The 3Com V6000 Branch Office Solution provides VCX call processing
capability and IP Messaging services along with up to 24 analog (Media
Gateway) connections for a branch office environment. The VCX
processor and the Media Gateway are separate functional units housed in
the same chassis. The VCX processor and the Media Gateway must be
configured separately.
The analog connections can be either FXO or FXS:
FXO versions connect to analog trunk lines from the Public Switched
Telephone Network (PSTN).
FXS versions connect to analog telephones, fax machines, analog
modems, and door intercoms/openers.
Figure 1 V6000 Front Panel
1
2
3
4
5
6
7
8
9
10