Filter
Top Products
418 APPENDIX C: REPLACING A FAILED DISK ON A VCX SERVER
The script detects that you have already configured the networking
parameters for the server and prompts you to configure VCX services.
8 After the branch office IP Telephony Server has completed the boot
process, configure it using the instructions in
“Configuring an IP
Telephony Server at a Branch Office” in Chapter 3.
9 On the Authentication and Directory server in the regional office that is
associated with this branch office, check replication for the database for
this branch office and verify that the status is normal.
a Log in as cworks.
b Enter these commands:
cd /opt/3com/VCX/vcxdata/bin
./checkReplication
c Enter the site ID of the remote regional office or the branch office.
If replication has been completed, you see this message:
INFO: Multi-Master Replication STATUS:
**************************************
*************** NORMAL ***************
**************************************
If you see a different status message, database replication has not yet
been completed.
10 On the Call Processing Server that is located in the regional office that is
associated with this branch office, start the Tomcat process.
a Log in as root.
b Enter these commands:
cd /opt/3com/VCX/scripts/rc3.d
./S70tomcat start
This marks the end of the outage.