Filter
Top Products
Obtaining Call Processor Status 291
Obtaining Call
Processor Status
To obtain the status of the Call Processor service:
1 Log in as vcx to the server on which the Call Processor service resides.
2 Enter these commands:
cd /opt/3com/VCX/scripts/rc3.d
./S80callp status
Starting the Call
Processor
The script that starts the Call Processor service runs the Call Processor
service in the background with the Call Processor process monitor. The
process monitor monitors the Call Processor server application and
restarts it if the application stops.
Once the Call Processor service is started, it is automatically restarted by
the process monitor if there is a failure, and it is automatically restarted if
the VCX server (PC) is rebooted. The Call Processor service does not need
to be started again.
Exceptions:
■ After you stop the Call Processor service using the script with the stop
option
■ If the process monitor exceeds the set number of automatic restarts
To start the Call Processor service:
1 Log in as vcx to the server on which the Call Processor service resides.
2 Enter these commands:
cd /opt/3com/VCX/scripts/rc3.d
./S80callp start