![](http://pdfasset.owneriq.net/6/2b/62ba7e24-60bf-42be-a3c0-45b4dfb6d221/62ba7e24-60bf-42be-a3c0-45b4dfb6d221-bg103.png)
Gateway Installation 259
4 Connect the other end of the cable to a serial port on a PC.
5 On the PC, run a terminal emulation program with these parameters:
■ VT100 emulation mode
■ 115,200 Baud
■ 8 data bits
■ 1 stop bit
■ No parity
■ No flow control
6 At the prompt, enter this command:
vcx-setup
The VCX processor within the V6000 runs the IP Telephony and
Messaging software configuration. For instructions on how to configure
the VCX processor, see
“Configuring a Branch Office IP Telephony and
Messaging Server” in Chapter 2.