Filter
Top Products
219
Sample Services Configuration Script — Secondary Authentication and Directory Server
(continued)
VCX Authentication & Directory Services can provide support for System
Speed Dials. This feature must be enabled only at a single site, and if
replication is in use, the setting must be the same on the primary and
secondary servers for that site.
Enable System Speed Dial Master? [N] : Y
At a regional site, you should have entered Y for the Primary
Authentication and Directory Server. Also enter Y here for the Secondary
Authentication and Directory Server. In supported VCX configurations,
the primary and secondary servers are located in different regional
offices.
Do you wish to change any of the Auth & Dir Service parameters? [N] :
Press the Enter or Return key to accept the default answer (N). If you
answer Y to this question, the script presents each of the items that you
have entered during the most recent part of the script and allows you to
accept the value or change it.
------------ Configuring additional parameters for Common Agent ------------
The Trap Destination specifies the IP address to be used as a destination
when this system sends SNMP traps.
Trap Destination :
Enter the IP address of the PC or other system on which you are running
your network management software (for example, EMS).
The Trap Community String provides a community string to be used when
sending SNMP traps to the trap destination.
Trap Community String : public
CAUTION: Press the Enter or Return key to accept the default answer
(public). 3Com strongly recommends that users change this string for
security reasons.
The Write Community String specifies the community string to be used by a
management station when sending write requests to this system.
Write Community String : private
CAUTION: Press the Enter or Return key to accept the default answer
(private). 3Com strongly recommends that users change this string for
security reasons.