3Com V7000 Telephone User Manual


 
316 APPENDIX B: AUTOMATED BRANCH OFFICE INSTALLATION
Sample vcx-createcfg Script (continued)
------------ Configuring additional parameters for Common Agent ------------
The Trap Destination specifies the IP address to be used as a destination
when this system sends SNMP traps.
Trap Destination :
Enter the IP address of the PC or other system on which you are running
your network management software (for example, EMS).
CAUTION: This parameter can be configured only in the .ini file. If you
attempt to configure it through the browser interface, all calls on the
Media Gateway are interrupted and the SNMP trap destination is not set.
The Trap Community String provides a community string to be used when
sending SNMP traps to the trap destination.
Trap Community String : public
CAUTION: Press the Enter or Return key to accept the default answer
(public). 3Com strongly recommends that users change this string for
security reasons.
The Write Community String specifies the community string to be used by a
management station when sending write requests to this system.
Write Community String : private
CAUTION: Press the Enter or Return key to accept the default answer
(private). 3Com strongly recommends that users change this string for
security reasons.
The Read Community String specifies the community string to be used by a
management station when sending read requests to this system.
Read Community String : public
CAUTION: Press the Enter or Return key to accept the default answer
(public). 3Com strongly recommends that users change this string for
security reasons.