Filter
Top Products
157
Sample Services Configuration Script — IP Messaging Client (continued)
------------------------- Configuring VCX Services -------------------------
This system runs IP Messaging services.
Please enter the role of this system:
1 - This is a regional office, primary IP Messaging server.
2 - This is a regional office, secondary IP Messaging server.
3 - This is a branch office IP Messaging system.
4 - This system is a client in an IPMSG client-server deployment.
5 - This system operates standalone.
Enter your choice by number [1] : 4
Enter 4 to configure this server as a client in an IP Messaging Client/Server
configuration.
Services running on this system need to communicate with other systems and
devices in order to operate. In the next series of questions, you will be
asked for information about these, and for other global parameters.
The SIP default dialing domain is used to construct the SIP URI for
outbound SIP requests.
Enter the SIP default dialing domain : 1.1.1.1
You must use the same dialing domain for all servers in a VCX system.
3Com recommends the use of 1.1.1.1 as the dialing domain.
The primary Call Processor has principal responsibility for handling calls.
IP address of the primary Call Processor :
Call Processor tasks are associated with the eth1 network interface. Enter
the IP address of eth1 on the Primary Call Processing Server.
The secondary Call Processor acts as a backup if the primary is down or
unreachable.
IP address of the secondary Call Processor :
Call Processor tasks are associated with the eth1 network interface. Enter
the IP address of eth1 on the Secondary Call Processing Server.