3Com V7000 Telephone User Manual


 
159
Sample Services Configuration Script — IP Messaging Client (continued)
-------- Configuring additional parameters for IP Messaging Service --------
How many voice ports does this IP Messaging System have?
Number of VoIP ports : 120
Press the Enter or Return key to accept the default value (120).
IP Messaging includes support for Text To Speech (TTS) via one or more
external servers. To use this feature you must answer 'Y' here.
Is Text To Speech (TTS) enabled? [N] :
Press the Enter or Return key to accept the default answer (N). If you
answer Y to this question, the script prompts you for the IP address of up
to four Text-to-Speech Servers. Each server is a PC running the Windows
operating system. If you have entered IP addresses for all of your
Text-to-Speech Servers, press the Enter or Return key for all remaining IP
address prompts. If you enable Text-to-Speech, you must use the G711u
CODEC (the default), not the G729a CODEC.
Do you wish to change any of the IP Messaging Service parameters? [N] :
Press the Enter or Return key to accept the default answer (N). If you
answer Y to this question, the script presents each of the items that you
have entered during the most recent part of the script and allows you to
accept the value or change it.
------------ Configuring additional parameters for Common Agent ------------
The Trap Destination specifies the IP address to be used as a destination
when this system sends SNMP traps.
Trap Destination :
Enter the IP address of the PC or other system on which you are running
your network management software (for example, EMS).
The Write Community String specifies the community string to be used by a
management station when sending write requests to this system.
Write Community String : private
CAUTION: Press the Enter or Return key to accept the default answer
(private). 3Com strongly recommends that users change this string for
security reasons.